搜索

购物车()
胎牛血清 移液枪头 PEI DMEM eppendorf
首页> 仪器


7X7高级加热搅拌器
  • 商城价格 登录后可查看价格
  • 货号 984TA7AHSEUA
  • 品牌 talboys ( 经销商 )
  • CAS号 843
  • 规格/包装 台
  • 单位 台
  • 储存条件
  • 现货状态 三周
  • 数量

    - +

    成功收藏产品
  • 立即购买
登录后可见商家信息
热门推荐
商家描述 包装清单 售后服务 产品评价(0)

7 x 7 Advanced Aluminum Top Hotplate-Stirrer, 230V

7×7先进铝板加热搅拌器，230V

CE mark indicates that this product conforms with the essential health and safety requirements set out in European Directives，CE标记表明产品符合基本的健康和安全要求中规定的欧盟指令

Excellent temperature uniformity良好的温度均匀性

Microprocessor controlled微处理器控制

Cool touch, chemical resistant housing清凉的触感，耐化学腐蚀外壳

LED display for temperatureLED显示温度

Talboys Advanced hotplates, stirrers and hotplate-stirrers deliver accurate and repeatable results. These units are microprocessor controlled and have an LED display for temperature. Control panel features easy-to-use controls which allow users to dial in adjustments. Rear housing features an integral support rod holder with locking knob to accept the optional support rod and clamp kit.

先进的电炉，搅拌器和烤盘搅拌器提供准确和可重复的结果。这些单元是微处理器控制，有一个LED显示温度。控制面板功能的易用的控件允许用户拨入的调整。后壳体具有一个完整的支撑杆座锁紧旋钮接受可选的支撑杆和夹盒。

Hotplate-Stirrer is supplied with a 1.5" (3.8cm) PTFE coated stir bar. Hotplate-Stirrer is also supplied with a probe kit which includes an 8" (20.3cm) stainless steel PT1000 RTD temperature probe, 12" (30.5cm) flex arm, and interchangeable 3-prong clamp head, 2-prong clamp head and spring clamp head. Unit includes a 5 year, industry leading limited warranty on parts and labor.

烤盘搅拌器提供一个1.5“（3.8cm）聚四氟乙烯涂层的搅拌棒。烤盘搅拌器也提供一个探针试剂盒包括一个8“（20.3cM）不锈钢PT1000温度探头，12”（30.5厘米）伸缩臂，和可互换的三插脚夹头，两脚夹头、弹簧夹头。单元包括一个5年，行业领先的部件和人工有限保修。

Operating Conditions: Hotplate-Stirrer can be run in conditions from 5 to 40°C (41 to 104°F), 20% to 80% relative humidity, non-condensing.

操作条件：烤盘搅拌器可以运行条件从5到40 C（41～104°°F），20%至80%相对湿度，无冷

Microprocessor Control Advanced electronics regulate both heating and stirring and bring samples to temperature quickly and efficiently. RTD accurately measures and controls temperature. Precise speed control provides consistent stirring at all speeds. Powerful continuous duty motor delivers dependable and reliable stirring.
Control Panel Adjustment knob for temperature displays set-point in LED display. Stir control knob has rpm adjustment markings.
LED Display Shows set-point temperature. Display is easy-to-read and provides repeatable and accurate results every time.
Top Plate Material Ceramic tops feature a chemical resistant, reflective white top plate surface that is easy to clean. Durable aluminum tops will not crack or chip, and provide a more even temperature distribution.
Recall Last Temperature Built-in memory allows users to recall last set temperature, even when unit has been turned off.
Heating Capacity Robust heater allows heating surface to reach set point quickly.
Built-In Support Rod Holder Rear housing features an off centered, built-in support rod holder with locking knob that accepts the optional Support Rod and Clamp Kit.
Low Profile Design Takes up minimal space and fits easily into fume hoods. Spill-resistant design channels fluids away from internal components.
Cool Touch Housing Housing is made of a heat resistant polymer that is not only cool to the touch, but is also chemical resistant.
Hot Top Indicator For additional safety, hot symbol warning light is illuminated when heat is turned on and remains on until top plate cools down.
Stir Protection If stirrer motor stops or fails, unit will automatically shut down heater.
Speed Ramping Feature Slowly increases motor speed for improved safety and enhanced coupling. Avoids splashing, improves spin bar control, and provides excellent low end speed control.

返回顶部