会员登录.getTime()%>)
购物车()
首页>
仪器
成功收藏产品
Advanced Dura-Shaker for Extreme
Environments, 230V在极端环境中先进的硬摇，230V
CE mark indicates that this product
conforms with the essential health and safety requirements set out in European
DirectivesCE标记表明产品符合基本的健康和安全要求中规定的欧盟指令
Designed for use in CO2 Incubators and
other extreme environments up to 100% humidity
设计用于二氧化碳培养箱和其他极端环境下高达100%的湿度
Remote controller magnetically attaches to
most incubators遥控器磁最重视孵化器
The Talboys Dura-Shaker is designed for a wide range of applications including cell cultures that require CO2 and humidity for optimal cell growth. The microprocessor control provides consistent uniform shaking while safely ramping to the set speed.
振动筛设计用于广泛的应用，包括细胞培养，细胞生长的最佳需要CO2和湿度。微处理器控制提供一致的摇晃均匀而安全斜坡设定速度。
Dura-Shaker is supplied with an 11 x
13" (27.9 x 33cm) non-skid rubber mat. Dura-Shaker includes a 5 year,
industry leading limited warranty on parts and labor.
硬脑膜摇床是提供一个11×13”（27.9×33cm）橡胶防滑垫。硬脑膜振动器包括一个5年，行业领先的部件和人工有限保修。
Operating Conditions Unit can be run in
cold rooms, incubators, and CO2 environments from -10 to 60°C (14 to 140°F), up
to 100% humidity.使用状态机可以运行在冷藏室，孵化器，和CO2的环境中，从10到60 C（14～140°°F），高达100%的湿度。
Microprocessor Control
The variable speed microprocessor control provides consistent uniform shaking action. Microprocessor will display last set-point and will restart if power is interrupted.
Accu-Drive Shaking System
The exclusive Accu-Drive Shaking System delivers exceptional speed control, accuracy, and durability. The shaking system continuously monitors shaking speed and maintains set-point, even under changing loads. When unit is set to a speed above 100rpm, the speed accuracy is ± 1%. When set under 100rpm, speed accuracy is ± 1rpm.
Triple Eccentric Drive
Permanently lubricated ball bearings and maintenance free, brushless DC motor provide reliable service and continuous duty operation.
LED Display
Touch pad controls with easy-to-read, independent LED displays for speed and time allow operator to view both settings at once. Provides repeatable and accurate results every time and is easily visible across lab benches. Timer will display elapsed time, or when programmed to user defined limit, will shut off unit when time reaches zero. Display will show last used settings, even after power has been turned off.
RS-232 Interface
Provides two-way communication for data logging and unit control.
Speed Calibration Mode
Allows user to automatically recalibrate speed display.
Speed Ramping Feature
Slowly increases speed to desired set-point to avoid splashing.
Spill-Resistant Design
Channels fluids away from internal components.
Overload Protection
Audible and visual signals will activate when system detects an obstruction or overload of the tray.
Audible Alarm
In timed mode, alarm will sound when time reaches zero. Alarm has optional mute function which can be set from the touch pad controls.